Location Android

Android

Using BizGo! Air, you can retrieve the location information of the managed Android devices. To utilize this feature, it is necessary to install the BizGo! Air application. Please note that the BizGo! Air app is a restricted-access application, and registration with EMM service is mandatory.

 

• Push notifications will be sent to track the device's location regularly.
• Push notifications will be sent to devices with location settings turned off, urging them to turn the settings on.
• The accuracy of wireless network positioning results may vary.
• Please be aware that using the location feature will increase device power consumption.
• In places with poor visibility, such as tunnels, the location service may not be able to determine the location.
• The accuracy of the location feature may vary depending on the device's GPS capability.
• The settings may vary depending on the device model.

 

Preparation

• Enable location sharing in the management console

  To enable location settings, please refer to the instructions provided in the management console.

• Distribute BizGo! Air app (Android)

  For preparation regarding the mandatory app distribution to each device, please refer to the instructions provided here.

• Launch the app on the device and enable location service and notifications

  For information on the initial app launch after completing the app installation on the device and setting up location and notification settings on the device side, please refer to the instructions provided here.

   

   

Operations

Check the app activation status on the device through the management console

If you want to verify whether the app is correctly configured on the device, please refer to this guide.

Check the location on the management console

After completing the preparation of the app and device, please refer to this guide to check the location history on the management console.

Operate through the management console

Refer to this guide to learn how to send commands to each device from the management console.

Operate on the device

Refer to this guide to learn how to perform operations directly on the device.